Pgm Volume pot Replacement

[Morzana]

Anyone found a good equivalent gear volume pot for Pgm slot ?

 

[MetalMario]

1k P104 pot works fine. you can ghetto style it, extend the wires or do it more proper.

Previous owner of mine thrashed it pretty bad.

 

[GC8TECH]

Alibabas has some. You will need a 15mm/16mm wheel.. NOT 20mm which i accidentally bought... They fit.. you have to mod the case though....

https://www.alibaba.com/product-detail/B1K-thumb-wheel-potentiometer_62058950751.html

https://www.alibaba.com/product-detail/15-1-16-2-Dual-thumb_60599785998.html


T.

 

[Kavas]

Finally got my minigun supergun up and running. My IGS PGM isn't outputting sound though even after a recap. I am guessing it's this wheel? Is this a normal problem on the PGM's ?

 

[Kavas]

Still not getting sound out of my igs. I tested a volume pot that was linked above by GCtech but to no avail.

I tried looking in the bios settings and music and sound is set to YES or on. The Minigun supergun I'm using works with my other arcade hardware.

Any help?

 

[Flinnster]

I found these radial dial pots as a close replacement. They aren't 100% pin compatible - you have to solder a wire link underneath, but they work well:

If you're not getting any audio try shorting the pins with a wet finger around that pot area. If you don't get anything, not even a hum then your audio amp or 12v in is bad.