Pot's for WMMT (1|2)

[mathewbeall]

Hi Folks,

I would like to get some replacement pot's for my WMMT cabinet and bench setup - here is what I see in the manual - does anyone know what replacements for these could be? The brake/accelerator have a much shorter ramp up/down (I assume that is what the 40 degrees means)

Brake/Accelerator - EWSV7BF20E 13 (40 degrees)
Steering - 88800053. Appears to have no stops - pretty much 360 degrees from 0 to 5v.

Thanks in advance!

Matt

 

[obcd]

Aren't brake and accelerator normal 5K potentiometers that can rotate 270 degrees?
You could measure the analog voltage on the jvs board inputs.
It likely isn't varying between 0V and 5V which you would see if the full range of the potmeter is used.

Even those potmeters that rotate the full 360 degrees only have a 270 degrees usefull angle due to the nature a potmeter is made.
So you just have to check mechanically how much rotation angle that is needed. As the limits there are close to 0V and 5V, it might be best to use a type that can freely rotate 360 degrees.