What's new
I can ship to everywhere but the shipping cost is insane nowadays.

They have asked 450-500 euro to France.

How much is the cab when bought fron you direct?
we know the price set by the uk distributor, not sure if there's any variation.

if possible with a similar spec::

ALL METAL PARTS with Powder Coat (YELLOW-PINK -GREEN)
WHEELS
PLEXI GLASS
JAMMA WIRING
LOCKS AND KEYS
ALL THE STICKERS
CONTROL PANEL STICKER
NEW SANWA STICKS AND BUTTONS IN ORIGINAL SPEC COLOUR
CUSTOM BRACKET FOR WELLS GARDNER 19″ ARCADE MONITOR

thanks
 
That's basically what I'm dealing with right now. I've been trying to book a container out of Taiwan and a lot of freight forwarders aren't even giving me a price, much less saying anything can be booked. Container costs for me out of Japan have gone up 50% with some estimates of going even higher than that. The next normal shipment I have isn't leaving until Feb 19th. I'm still on track for all my next arrivals to be March/April though, if there's one thing I try to do is give very accurate estimates
 
Hey guys i have a question regarding the monitor solution, i apologize if this has been answered previously but I'm a novice and my knowledge on the subject is minimal. I've placed my order already and actually ordered a k7000 Chassis and found an appropriate tube swap. But it's a CR23 Chassis and monitor. Will it fit ok in the mini and still be able to mount / TATE? Just wondering if the difference in neck size is substantial. Again i apologize if this question has been answered already.

Thanks in advance.
 

Attachments

  • 139613437_347663390368889_6217212639906404065_n.jpg
    139613437_347663390368889_6217212639906404065_n.jpg
    163.8 KB · Views: 107
  • 140266554_119083966742875_4122526778523960574_n.jpg
    140266554_119083966742875_4122526778523960574_n.jpg
    156.1 KB · Views: 94
Last edited:
Hey guys i have a question regarding the monitor solution, i apologize if this has been answered previously but I'm a novice and my knowledge on the subject is minimal. I've placed my order already and actually ordered a k7000 Chassis and found an appropriate tube swap. But it's a CR23 Chassis and monitor. Will it fit ok in the mini and still be able to mount / TATE? Just wondering if the difference in neck size is substantial. Again i apologize if this question has been answered already.

Thanks in advance.

Yeah, @nem is right about it
I have tested it with the K7000 measurements but it seems to me ok too.

Can you give me the detailed measurements for the TUBE ?
 
Yeah, @nem is right about it
I have tested it with the K7000 measurements but it seems to me ok too.

Can you give me the detailed measurements for the TUBE ?
So i took some measurements but it's hard to be exact. It appears to be 36-37 centimeters from the mounting ear to the neckboard. I'll be able to get more accurate measurements as soon as possible.
 

Attachments

  • 143122402_961858024222282_5556477410199212101_n.png
    143122402_961858024222282_5556477410199212101_n.png
    278.3 KB · Views: 90
  • 141672444_132381738711594_301399704033355243_n.png
    141672444_132381738711594_301399704033355243_n.png
    984.3 KB · Views: 94
For reference incase anyone is familiar, here is the k7000 i purchased. Again, I apologize if these questions are obvious or annoying to answer. I'm a noob lol.
 

Attachments

  • 142094573_163742791953242_4866603746943017200_n.jpg
    142094573_163742791953242_4866603746943017200_n.jpg
    116 KB · Views: 94
So i took some measurements but it's hard to be exact. It appears to be 36-37 centimeters from the mounting ear to the neckboard. I'll be able to get more accurate measurements as soon as possible.
I will chck it for you today ;)

And guys, please check the video. All the process has been completed. Im just waiting Pleksiglass ( front ) and the Yellow Color. They are under process.

I will start to assembly on February 1st.

Sorry for the Delay :(

 
I will chck it for you today ;)

And guys, please check the video. All the process has been completed. Im just waiting Pleksiglass ( front ) and the Yellow Color. They are under process.

I will start to assembly on February 1st.

Sorry for the Delay :(

I'm not too concerned with the delay, you been pretty good at communicating and showing progress. Theses videos make the waiting easier.
 
I've contacted everyone who paid a deposit. If you do not pay the remainder by the time the order is shipped, you may be subject to paying the post-preorder price, please check your messages and respond to me, or if you don't see anything, get in touch with me.

I am going to try to hit everyone on the list who has not paid a deposit at all. Both of these categories may meet their intended purpose; I'm almost out of green Mini-Cutes. If you ordered a green and haven't paid a deposit, you will lose your spot if someone orders one. If you paid your deposit and someone else is going to pay the full amount, you may lose your spot as well. I am not unreasonable and will give everyone a chance based on whether they've made a deposit or not. Please do not ignore my messages, as this order is coming to a close and we cannot hold off on payments anymore.

I deeply apologize that I have not gotten to the inquiry page or gotten in touch with absolutely everyone yet; I'm managing 100 different clients and 400 items at a time right now, I'm really going as quickly as I can without letting any of the things fall. Especially for anyone who has already expressed interest along the proper channels, I still have you for priority on everything. I just DO need to wrap things up with everyone now so that we don't get behind later!

Here is the updated order list. If you are NOT marked as "Paid in Full", CONTACT ME. I WILL get a hold of everyone on the list eventually, but it will save me a lot of trouble if you get in touch and we can wrap things up quickly for the remainder of the payment. For those waiting for me to check my inquiries, the thing I mentioned above about green cabs running out is why I am not responding to them. I absolutely have to handle everyone's existing orders before allocating the last cabs to anyone.

Orders:
animesuperj - Pink x1 (Paid in Full)
Bad_Hambre - Pink x1 (Paid in Full)
benime - Green x1 (Paid in Full)
Blue_Fox - Pink x1 (Paid in Full)
statix138 - Pink x1 (Paid in Full)
Cereth - 4-8 Cabinets (Paid in Full)
chowmarcus - Pink x1 (Paid in Full)
Dakken - Green x1 (Paid in Full)
Epyc - Green x1, Pink x1, Yellow x1 (Paid in Full)
dennisfxm - Yellow x1 (Paid in Full)
Derick2K - Green x1 (Paid in Full)
everten - Green x1 (Paid in Full)
FairWitness - Yellow x1 (Paid in Full)
Fletcher - Green x1 (Paid in Full)
Jermz0r - Pink x1 (Paid in Full)
Lemony Vengeance - Yellow x1 (Paid in Full)
Loegan43 - Pink x1 (Paid in Full)
mikaeltarquin - Green x1 (Paid in Full)
MudGuts83 - Green x1 (Paid in Full)
NeoLurker - Pink x1 (Paid in Full)
owlnonymous - Green x1 (Paid in Full)
Pixel Krisis - Pink x1 (Paid in Full)
Pymelk - Green x1 (Paid in Full)
rewrite - Green x1, Pink x1, Yellow x1 (Paid in Full)
Wiihavealife - Green x1 (Paid in Full)
zero238 - Green x1, Yellow x1 (Paid in Full)
Benjamin C. - Yellow x1 (Paid in Full)
Brandon O. - Green x1, Pink x1 (Paid in Full)
Eric C. - Yellow x1 (Paid in Full)
hoagtech - Green x2 (Deposit Paid)
Kidkaos - Pink x1 (Deposit Paid)
Rg111 - Green x1 (Deposit Paid)
theoddtech - Pink x2 (Deposit Paid)
Marcus L. - Pink x1 (Deposit Paid)
Sebastian M. - Green x1
Larry D. - Yellow x1
Terrance S. - Yellow x1
Rick D. - Green x1
Christopher A. - Green x1, Pink x1
Dean M. - Yellow x1
Julius V. - Yellow x1
Mike P. - Yellow x1
exidy - Pink x1, Yellow x1
Cory B - Yellow x1
Joverlee D. - Green x1
moist_pixels - Pink x1
DarthMig - Yellow x1
Sokky - Green x1
Mike M. - Pink x1
Dorkocity - Green x1
 
I think I'm going to remove email contact as a means of communication with people. Half don't respond at all, and the other half the time I can't even search for their emails. It's a shitty mode of contact these days.

At least half the people on the unpaid list have not responded to me at all. Hopefully this doesn't delay the shipment of the container, the whole reason I had the preorder list was so that we could estimate costs. That's about $10,000 short of what we were expecting. That said, some of you who want a green cute will probably end up getting it if these guys don't get back to me.
 
Back
Top