What's new
By:

Pre-Order For Mini Cute Production

ItsBobDudes said:
Are you going with a consumer tube with a K7000 or you got something else in mind?
Click to expand...
I have a K7000 chassis that I hope is still good, looking for a consumer donor tube.
I have a Sylvania srt2219 tv that I hope has a drop-in replacement tube that works with the K7000.
If not, and I cant find a decent donor tube then Ill move onto fitting a Dell 2001FP lcd that has 1600x1200res, 20" 4:3, and I think also works with 15khz?? or use a scaler until I can get a crt.
 
I have a RCA tube that *should be a drop in replacement for the K7000 series chassis. I decided to wait to fit the tube in the frame 1st to determine whether the neck length of the tube will clear the back of the cabinet.

I also have very little idea of what I'm doing. Thankful that Hursit put out that video.
 
I just wanted to say that the entire experience with @Cereth and @hursit has been beyond expectations. As someone new to cabs and the process of getting one, this endeavor felt like a bridge too far to me in the beginning but I took a leap of faith because the Mini Cute is my Holy Grail cab. Hursit has been able to answer all of my questions and concerns about the cab and Cereth has provided a level of customer service and transparency that I'm still honestly shocked by. If you're looking for a cab and not trying to do some business with Cereth, I think you're making a mistake.

I know I'm amongst many waiting for these Cutes but I just wanted to take moment to sincerely thank the two of them for giving us not only a new cab, but a boutique experience. Cheers.
 
zero238 said:
Anyone have a list of consumer TVs that i need to find?
Click to expand...
2021-07-06_17-36-24.jpg

This is the list I went off when first looking
 
BigSchmid said:
I just wanted to say that the entire experience with @Cereth and @hursit has been beyond expectations. As someone new to cabs and the process of getting one, this endeavor felt like a bridge too far to me in the beginning but I took a leap of faith because the Mini Cute is my Holy Grail cab. Hursit has been able to answer all of my questions and concerns about the cab and Cereth has provided a level of customer service and transparency that I'm still honestly shocked by. If you're looking for a cab and not trying to do some business with Cereth, I think you're making a mistake.

I know I'm amongst many waiting for these Cutes but I just wanted to take moment to sincerely thank the two of them for giving us not only a new cab, but a boutique experience. Cheers.
Click to expand...
Both @Cereth and @hursit have been top-notch on everything, I've never had an issue with either of them.
 
mikaeltarquin said:
Just to be clear, just those center 5 are what would be drop in replacements with a K7000 chassis? Or all of the ones listed in that pic?
Click to expand...

There are likely hundreds of compatible tubes for a K7000. Grab any two 19" TVs locally and you have a 90% chance that at least one will drop-in compatible.

K7000 10-pin neck boards are rare. If you do happen to get one, I will gladly swap an 8-pin one for it. Just PM me.
 
You must log in or register to reply here.
Back
Top