Thanks!DigiKey can program a crystal to oscillate at whatever clock speed you want.
This part should fit your board and when you order it, you can specify the clock rate you want it programmed at.
https://www.digikey.com/en/products/detail/ecs-inc/ECS-P85-B/502310
Woo hoooo! Just installed . Time to figure out where the red wentDigiKey can program a crystal to oscillate at whatever clock speed you want.
This part should fit your board and when you order it, you can specify the clock rate you want it programmed at.
https://www.digikey.com/en/products/detail/ecs-inc/ECS-P85-B/502310
Broken trace under the board! Already found and patched don’t have 1p left thoughGive the JAMMA connector a good cleaning with some cotton swabs and isopropyl alcohol - if you’re lucky, it’s just a tarnished connection.