Yodamingus
Beginner
Getting a revision 6 B board to set up a dark soft kit
the seller sent a photo ...
Supposed to have been originally a PAL G game
So I had 2 questions :
1. Are the jumpers set correctly for a PAL G
2. What is up with the solder blob on the bottom left bridging 4 pins
Seller said all his boards have the same blob on the connector that it’s factory original .. but iv never seen this ..
Also that the jumpers are set correctly and that the board was tested with the dark soft kit and it’s 100% working and ready to go
So what’s the deal ..
anyone ever found a solder bridge on this conetor before ?
What are those pins for ..I’ll try to find out ..
Following the instruction for the DSkit looks like the jumpers are wrong to me
Any opinions
Thanks !
the seller sent a photo ...
Supposed to have been originally a PAL G game
So I had 2 questions :
1. Are the jumpers set correctly for a PAL G
2. What is up with the solder blob on the bottom left bridging 4 pins
Seller said all his boards have the same blob on the connector that it’s factory original .. but iv never seen this ..
Also that the jumpers are set correctly and that the board was tested with the dark soft kit and it’s 100% working and ready to go
So what’s the deal ..
anyone ever found a solder bridge on this conetor before ?
What are those pins for ..I’ll try to find out ..
Following the instruction for the DSkit looks like the jumpers are wrong to me
Any opinions
Thanks !
