What's new
By:

Random video disconnects with Minigun Supergun

klee123

klee123

Professional
Joined
Nov 11, 2020
Messages
302
Reaction score
245
Location
QLD, AU
So recently I've started using the minigun supergun more since I managed to get sound working for it and been testing CPS2 boards.

I noticed that when I play CPS2 stuff I get random video disconnects for 1-2 seconds then it appears again.

I am powering my Supergun with an ATX power supply and the voltmeter shows it around 4.8-4.9 volts.

When I play a Banpresto board (Denjin Makai II) this issue doesn't occur (Voltage is at 5V constantly)

In this case, I'm presuming the issue is the lack of sufficient volts in the CPS2 A board?

Any help/info would be appreciated. Thanks!
 
PCB doesn't reboot, it's more like the video just cut out and resumes again.
 
Are you using a CRT Or a Scaler? I had this problem when using a CPS2 + Scaler + splitter on an Aero City cab specifically. I had to run the csync signal through a sync stripper to get it stable.
 
I'm using an upscaler via XRGB.

I did fiddle around with the Sync settings and managed to fix this actually. I no longer get disconnects, which is good :)

However, I am getting issues with another type of board which is the Taito F3, but that for another topic. :D
 
Raph_friend said:
F3 is a mess. CRT is the way.
Click to expand...
Yeah, I'm looking at certain solutions to this.

It seems the HAS supergun has a solution to this specifically for my specific problem with XRGB upscalers.

Might have to look into that a bit more.
 
You must log in or register to reply here.
Back
Top