What's new

Released: MK1 for Wolf Unit boards

Check your roms. Try to use different roms and always verify.

The fact you get different results with the same roms ,reburned, seems to point to something wrong with them.

Edit: What game was on the board before you put MK1 in it? Try with UMK3 prog roms and see if you can enter the setup by dip.
There may be some corrupt data in cmos that i'm trying to read the volume setting from..
 
Asure said:
Check your roms. Try to use different roms and always verify.

The fact you get different results with the same roms ,reburned, seems to point to something wrong with them.

Edit: What game was on the board before you put MK1 in it? Try with UMK3 prog roms and see if you can enter the setup by dip.
There may be some corrupt data in cmos that i'm trying to read the volume setting from..
Click to expand...
Roms are fine. Used at least 6 different roms. The only different result I got was the single led illuminating. Board had umk3 on it. I always clear the cmos by popping the battery out between swapping roms. If I put all the umk3 roms back in, the board boots just fine.
 
SubScorpion said:
Roms are fine. Used at least 6 different roms. The only different result I got was the single led illuminating. Board had umk3 on it. I always clear the cmos by popping the battery out between swapping roms. If I put all the umk3 roms back in, the board boots just fine.
Click to expand...
Can you post some pictures of your board?
 
SubScorpion said:
Roms are fine. Used at least 6 different roms. The only different result I got was the single led illuminating. Board had umk3 on it. I always clear the cmos by popping the battery out between swapping roms. If I put all the umk3 roms back in, the board boots just fine.
Click to expand...
Ive sent you a PM
 
Darksoft said:
Can you post some pictures of your board?
Click to expand...
Sure.
20260216_033144.jpg
Just for testing purposes, I also swapped the roms over to the board I'm running the Jam SE port on and same thing, single led, no other signs of life. Trying a different rom set and will report back of that works.
 
Has anyone tested 5.2 on a pcb yet? I have been unable to get any releases, including this one to boot.
 
Currently working with the man the myth.... on getting the updated code to work on the wolf board. Initial testing failed on real hardware with one of the first builds. Then we got it working and of course it was a proof of concept to get it to boot, which it did. Asure did some other updates which set us back two steps. This is beginning worked on and when we get it worked out I'm sure it will be posted here.

Thanks,
Jne (jump not equal)
 
jne. said:
Currently working with the man the myth.... on getting the updated code to work on the wolf board. Initial testing failed on real hardware with one of the first builds. Then we got it working and of course it was a proof of concept to get it to boot, which it did. Asure did some other updates which set us back two steps. This is beginning worked on and when we get it worked out I'm sure it will be posted here.

Thanks,
Jne (jump not equal)
Click to expand...
I might be able to make roms Friday. this is exciting.
 
We are still working through things, this will be updated as needed. But I "Asure" you... you like what i did there... We had video and no sound on one of our initial builds.
 
I've added release 5.4 to the main post, this solves the bootup on real hardware and smashes the nasty bug we had there.
Make sure the SKIP POWERUP TEST dip is ON for real hardware! (DIP2 - SW2 should be ON)
Also some sweet new features ;)
 
Last edited:
Some bugs that I noticed as well through MAME:
  • When doing Lui Kang's Fatality, the fatality music will just keep playing even after he uppercuts his opponent.
  • I dunno if this is noted but adjusting the volume through test menu works but won't save upon starting up the game. If I go back to adjust again, the bar is still set to max but it won't take effect until I hit HP. This function works on MK2 though.
 
You must log in or register to reply here.
Back
Top