Tailsnic Retroworks
Champion
Hi. I have this Outfixies board with these glitches. I know the error is somewhere in OBJ section, but the roms are OK, full tested with another working NB-2.
In first photo, there are white lines/squares.
In the second photo, 2 horizontal big glitches.
In third photo, all the players illustrations should be seen.
In 4 photo, my FOE is an exact copy of me (any CPU character is shown this way), with bad graphics and its movement animations work at the same time a mines.
I have extracted and tested 3xLS244 and 4xLS374 TTLs near OBJ connector, 2x62256 rams, 2x C384 customs (exchanging them between, haven't tried 12U C384 yet) and exchanged C355 with a working one from a Point Blank board.
Anybody knows where should I check next?
In first photo, there are white lines/squares.
In the second photo, 2 horizontal big glitches.
In third photo, all the players illustrations should be seen.
In 4 photo, my FOE is an exact copy of me (any CPU character is shown this way), with bad graphics and its movement animations work at the same time a mines.
I have extracted and tested 3xLS244 and 4xLS374 TTLs near OBJ connector, 2x62256 rams, 2x C384 customs (exchanging them between, haven't tried 12U C384 yet) and exchanged C355 with a working one from a Point Blank board.
Anybody knows where should I check next?
