Replacement for Ferrite Beads on C board?

[Glossectomy]

I had a previously working CE board, that no longer seems to be functioning after pulling it out of storage. Visually the only thing I'm seeing is a broken jumper at FB1 on the C board.

A. Would this be a reason for the board to not boot?

B. Even if no, what part should I be looking at to replace it?

Thanks in advance!

 

[Apocalypse]

A. No
B. Well, a piece of wire between pins 1 & 3 should work well enough

 

[YesAffinity]

The fb looks to stil be in tact, so shouldn't be your issue.

Do you have a known good set you can use to swap parts?

Check the pal's. If those are good, and theres nos signs of nicked lines, it's probably the b-21 that has gone bad.