Replacing UltraSIMMs DIP Switches

[mathewbeall]

Looks like my new boards arrive on Wednesday... I will report back late Wed evening!

 

[Orakelschaf]

Attached are the latest STLs for all the knobs (Selector, Volume, Test).

Thanks a lot for creating the label!

 

[sLpFhaWK]

Attached are the latest STLs for all the knobs (Selector, Volume, Test).

Thanks a lot for creating the label!

thats sick! need me a label too when my jasens gets here.

 

[mathewbeall]

Ok - pcb's got here 1 day earlier than expected... Thankfully - the fit appears perfect! As I said before - just the horizontal and vertical positions are slightly tight, but it doesn't affect the switch at all.

I have 2 to pack up and send off - let me know if anyone else would like some - I have plenty of pcb's for both the jasen case and a non-jasen case. I would have to reorder the components if I get more than 4 people wanting them.

 

[mathewbeall]

And here are the adjusted gerbers I used.

 

[msamiullah]

it rotates just fine?

 

[ForestOfDreams]

Ok - pcb's got here 1 day earlier than expected... Thankfully - the fit appears perfect! As I said before - just the horizontal and vertical positions are slightly tight, but it doesn't affect the switch at all.

I have 2 to pack up and send off - let me know if anyone else would like some - I have plenty of pcb's for both the jasen case and a non-jasen case. I would have to reorder the components if I get more than 4 people wanting them.

I could use 1 Pcb. Pm sent.

 

[Orakelschaf]

Thanks a lot for the gerbers. Will order a bunch of those pcbs for myself. If anyone in europe needs one of those (empty) pcbs : let me know (it is cheaper for me to order the pcbs than shipping one pcb around the world )