Request: Egret 2 metal coin chute replacement

[Dloop]

So I thought I'd ask here if anyone has done this already, before I try and go down the path of learning 3D modelling just to make the replacement myself. My coin chute for one of the Egret 2 is super rusty, to the point of not allowing coins through. I thought about it, and it is really put to no strain at all, so having a 3d printed replacement shouldn't be an issue in that term. So instead of trying to find a replacement metal part, I wanted to ask if anyone has a model of this already? Or feels compelled to create one

 

[ekorz]

If you can’t find or make one, I had mine re-plated (along with all the other metal). Where it had rusted it didn’t become mirror-shiny again, but it did become functional.

 

[Dloop]

If you can’t find or make one, I had mine re-plated (along with all the other metal). Where it had rusted it didn’t become mirror-shiny again, but it did become functional.

Thank you for the reply. I had actually looked into that, but apparently they have stopped offering that service in my part of Sweden at least, due to it being toxic

 

[ekorz]

View: https://youtu.be/G-PtnwtOR24


Toxic? Bummer. DIY!

 

[edonkey2000]

Actually, the original color isn't “chrome”; it's more of a grayish color. Mine is rusty, and I'd like to restore it to its original condition, but I'm not really sure if it's blue zinc plating or what the gray/blue outer layer is.

 

[edonkey2000]

If you can’t find or make one, I had mine re-plated (along with all the other metal). Where it had rusted it didn’t become mirror-shiny again, but it did become functional.

So I thought I'd ask here if anyone has done this already, before I try and go down the path of learning 3D modelling just to make the replacement myself. My coin chute for one of the Egret 2 is super rusty, to the point of not allowing coins through. I thought about it, and it is really put to no strain at all, so having a 3d printed replacement shouldn't be an issue in that term. So instead of trying to find a replacement metal part, I wanted to ask if anyone has a model of this already? Or feels compelled to create one

I have contacted Taito and, after requesting replacements for certain parts, I am currently negotiating to see if they can send me others. Regarding the parts:

E3013207A COIN CHUTE A
E3013208A COIN CHUTE B

Those are out of stock, but we can reproduce them. The prices depend on the order quantity.

I don’t know if you’d be interested in placing a joint order for them.

Best regards

 

[Semload]

I have contacted Taito and, after requesting replacements for certain parts, I am currently negotiating to see if they can send me others. Regarding the parts:



I don’t know if you’d be interested in placing a joint order for them.

Best regards

I've been writing to you for days about the cases you requested, which I drafted for you. Can you answer me?