Mr. SPC700
Beginner
Hello.
I posted this on the Crown Arcade adapter thread but maybe here I'll have more exposure.
I'm wondering if anyone else has experienced this issue with RGB-Pi OS4.
I have an Astro City cab with a two player control panel (1 stick and 6 buttons per player plus 1 start button each)
Sometimes, when I turn on my cab, the left player 1 physical controls become mapped to the player 2 and vice versa. So the right stick and buttons work as player 1 and the left stick and buttons work as player 2.
I've tried going to the controls settings but there's no way to change the buttons assignment (Joy 1 to Joystick 0 instead of Joystick 1) .
I also changed from Jamma 6 buttons to Jamma 3 buttons as the Crown Arcade adapter has a CPS2 style connector for the kick buttons. But I noticed that after a shut down and turning it on again, it reverts to Jamma 6 buttons. I don't know if this is correct.
Any help is appreciated.
I posted this on the Crown Arcade adapter thread but maybe here I'll have more exposure.
I'm wondering if anyone else has experienced this issue with RGB-Pi OS4.
I have an Astro City cab with a two player control panel (1 stick and 6 buttons per player plus 1 start button each)
Sometimes, when I turn on my cab, the left player 1 physical controls become mapped to the player 2 and vice versa. So the right stick and buttons work as player 1 and the left stick and buttons work as player 2.
I've tried going to the controls settings but there's no way to change the buttons assignment (Joy 1 to Joystick 0 instead of Joystick 1) .
I also changed from Jamma 6 buttons to Jamma 3 buttons as the Crown Arcade adapter has a CPS2 style connector for the kick buttons. But I noticed that after a shut down and turning it on again, it reverts to Jamma 6 buttons. I don't know if this is correct.
Any help is appreciated.