WTB Rhythm Tengoku Arcade Player 2 A button part

[Mogsey1510]

Sorry if this is the wrong place but Don’t suppose anyone or knows anyone that sells a button for player 2 A button rhythm heaven arcade? Sorry it’s sideways thank you

 

[nnap]

I think those are sanwa buttons. The letter is just a label under the button. So you should get it going by buying a new button to replace the missing top.

 

[Mogsey1510]

I think those are sanwa buttons. The letter is just a label under the button. So you should get it going by buying a new button to replace the missing top.

Thanks for info I don’t suppose you know what kind of sanwa button it is?

 

[nnap]

If they are 45mm buttons on the original panel, I have the button reference numbers in this post: https://www.arcade-projects.com/threads/rhythm-tengoku-panel.17592/
You have to measure the hole diameter to see uf they are 45mm buttons.

 

[Mogsey1510]

Thank you very much will look into it

 

[alberto1225]

for original button parts
OBSAX-C60 UM- 1Fx 4 (A/B)
OBSAX-C45 UK-1F x 8 (up right down left)
OBSAX-C30 UM-1F x 2 (starts)

 

[Mogsey1510]

for original button parts
OBSAX-C60 UM- 1Fx 4 (A/B)
OBSAX-C45 UK-1F x 8 (up right down left)
OBSAX-C30 UM-1F x 2 (starts)

Hey there I don’t suppose you know what one it is or is any of them good ?

 

[Mogsey1510]

If they are 45mm buttons on the original panel, I have the button reference numbers in this post: https://www.arcade-projects.com/threads/rhythm-tengoku-panel.17592/
You have to measure the hole diameter to see uf they are 45mm buttons.

Hey sorry for the noob question but what one is it thanks

 

[nem]

None of those are the correct one?

You need a 60mm button, those are all 45mm.

You want OBSAX-C60UM

Q is a domed top (UMQ). You do not want that.

-1F is the switch. You already have one, you don't necessarily need another (although I'm not sure you can buy the button without one -- probably good to have a spare too).

 

[Mogsey1510]

None of those are the correct one?

You need a 60mm button, those are all 45mm.

You want OBSAX-C60UM

Q is a domed top (UMQ). You do not want that.

-1F is the switch. You already have one, you don't necessarily need another (although I'm not sure you can buy the button without one -- probably good to have a spare too).

I heard I needed a 45? I measured the diameter of the button and it was 45mm thoug?

 

[nem]

I don't have an original panel, just going of @alberto1225's list.

Attached dimensions for the 60mm button.

 

[Mogsey1510]

I don't have an original panel, just going of @alberto1225's list.

Attached dimensions for the 60mm button.

Ah I see I believe mine is an original so will probably get the 45MM but thanks

 

[nnap]

What is the size of your button. If it is the original it might be 60mm and not 45mm. Mine was 45mm to fit the smaller panel.

 

[Mogsey1510]

What is the size of your button. If it is the original it might be 60mm and not 45mm. Mine was 45mm to fit the smaller panel.

Well I measured the diameter of the button and it was 45mm and I believe that’s the original size?

 

[nnap]

Can you show a picture how you measure the size?

 

[nem]

Considering Sanwa doesn't sell light up buttons in 24mm size, the start buttons must be 30mm. Just eyeballing from that pic alone, I would say the A and B buttons have to be 60mm.

 

[Mogsey1510]

Can you show a picture how you measure the size?

Sure

 

[nem]

That's 60mm.

 

[Mogsey1510]

That's 60mm.

Thank you

 

[Mogsey1510]

That's 60mm.

Just to confirm this is the right one