SOLD SANWA PM1745 chassis

[Viku]

Sanwa chassis for 29-inch monitors such as Toshiba/Hitachi/Samsung working perfectly. Beautiful image for arcade monitors for Sega Astro City, Blast City, Naomi, etc.
It is (almost) the same as the Nanao MS8-29 in connectors and image quality!

Chassis has been cleaned and tested !

Price: 290€ 270€ +shipping (from Spain)

 

[Viku]

also open for trades such as CPS2, ZN1/2, CPS3, etc.

 

[Viku]

Price DROP! : 290€ 270€ +shipping (from Spain)
also open for trades such as CPS2, ZN1/2, CPS3, etc.

 

[Viku]

price is chassis only

 

[Viku]

Up

 

[Viku]

Sold!

 

[pyJamma]

Sanwa chassis for 29-inch monitors such as Toshiba/Hitachi/Samsung working perfectly. Beautiful image for arcade monitors for Sega Astro City, Blast City, Naomi, etc.
It is (almost) the same as the Nanao MS8-29 in connectors and image quality!

Chassis has been cleaned and tested !

Price: 290€ 270€ +shipping (from Spain)

Hello. Looking at one of these for an astro (found one model like this sanwa local) The cabinet in question missing its original ms8-29 chassis and remote board, but tube and connectors still in cabinet. When you say almost the same connectors , one of these chassis wont be plug play? What needs to be altered on a cabinet which used to have ms8-29, in order to install a sanwa chassis?

 

[Viku]

nothing. it's the same conector

 

[pyJamma]

nothing. it's the same conector

Ok thanks. So direct fit onto a tube which had ms8-29 yoke and tube