Hey! seeking some assistance regarding harnesses for my set up.
Heres my exact psu/pcb set up. Just need the harnesses. Going to use two psu's independently for my netdimm/rasp pi/naomi 2/capcomi/o
https://www.arcade-projects.com/threads/awsd-power-supply-interface-pcb.12091/page-4#post-312694
I would need connectors on each side of the harness except the two neutral/Line ( 120v ) power psu harnesses
The two power harnesses to power up the each psu I just need you to give me the 5 min female adapter so I can plug that into the psu itself. then just a length of wire which I will do myself to connect to the existing power wires in the cab.
So in total two harnesses for each psu with female 5 pin connector and a length of wire installed in the 5 pins and the other end of that nothing but the wires needed to power up the psu.
then a complete harness one from the psu pcb to the naomi 2 connector on each side
then another complete harness from psu pcb to capcom i/o connector on each side
4 harnesses in total.
Heres my exact psu/pcb set up. Just need the harnesses. Going to use two psu's independently for my netdimm/rasp pi/naomi 2/capcomi/o
https://www.arcade-projects.com/threads/awsd-power-supply-interface-pcb.12091/page-4#post-312694
I would need connectors on each side of the harness except the two neutral/Line ( 120v ) power psu harnesses
The two power harnesses to power up the each psu I just need you to give me the 5 min female adapter so I can plug that into the psu itself. then just a length of wire which I will do myself to connect to the existing power wires in the cab.
So in total two harnesses for each psu with female 5 pin connector and a length of wire installed in the 5 pins and the other end of that nothing but the wires needed to power up the psu.
then a complete harness one from the psu pcb to the naomi 2 connector on each side
then another complete harness from psu pcb to capcom i/o connector on each side
4 harnesses in total.
