bobbydilley
Grand Master
Have already done research and there’s no way on earth to get line of sight tracking from a gyro,accel,compass setup without adding something else. The noise from the sensor is far far to high even with a filter.
A 9dof IMU usually refers to a chip that has a 3 axis accelerometer, 3 axis gyro and a 3 axis compass. You can buy them for things like arduinos, and I’ve had a good go with them. You can get pose fairly accurate but not positional displacement (moving the gun in the x, y or z direction).
If I remember correctly the gun doesn’t have a solenoid but a vibration motor, it’s pretty feeble so probably doesn’t require that massive board to power it.
A 9dof IMU usually refers to a chip that has a 3 axis accelerometer, 3 axis gyro and a 3 axis compass. You can buy them for things like arduinos, and I’ve had a good go with them. You can get pose fairly accurate but not positional displacement (moving the gun in the x, y or z direction).
If I remember correctly the gun doesn’t have a solenoid but a vibration motor, it’s pretty feeble so probably doesn’t require that massive board to power it.