WTB SJ25-0302-04 SEGA PSU board - Blast City / Versus City

[GhaleonUnlimited]

From a Blast City PSU , or VS City I think too.

Don't care if it needs a recap,I can do that ;p

Or if you have a similar board that can install in its place, into the Blast City internals to power Jamma + JVS , I guess let me know!

 

[Big_P Big_p]

Pretty sure the versus city PSU is different (I had one and I just checked), the new versus city may be the same.

I have a Sun Model 3 PSU see images, that was working when I pulled it. If that helps.

 

[GhaleonUnlimited]

Thanks !

I updated my other thread that I got a 400-5330-1 from not even sure what cab (on ebay ), and it doesn't physically fit in the space as is cos the Blast City fan wire is too short , but basically the PCB inside the PSU is plug n play w the Blast completely.

So it seems like these disparate SEGA PSUs are compatible w similar-era cabs, but you might just have to rearrange things inside your cab a little or extend a wire or two .

 

[Big_P Big_p]

Cool I have had this sitting a while and dont really know what to do with it. Dont even really know what its worth. Any ideas?