A couple years back I bought a couple blast city cabinets from a vendor here. The cabs arrived late so I did not have time to properly inspect them as I had to sneak them past my wife. The next day I noticed that one cabinet had an ms9 squeezed into it. This sent me down a path of scouring the internet to find a replacement monitor. I traded the ms9 for a pfx but continued to look for a nanao 2931 because I was being a fanatic about the fitment. Long story less long I accumulated 3 blast city monitors all with their own idiosyncrasies and decided to move on from because I'm going to stick with the pfx and these things are taking up a ton of space.
SOLD
Monitor B : SOLD!
Chassis: 2931
condition: slightest amount of black goop on the chassis the faintest amount of burn on the screen. Really cant see it even when your looking for it. This monitor had the anti glare coating removed and as a result its really bright even with the screen brightness turned really low. The unintended consequence of removing the anti glare coating is that now the colors seem to skew slightly green. Its just off and no matter what i did i could not get the white pure enough
Monitor C SOLD
Chassis: 2930
condition: Got this chassis from yhj and paired it with a tube I got from davesarcades the chassis does have a bit of goop on it which you could clean. As far as Ive seen these chassis are really durable and rarely ever have problems. The monitor is bright does have some burn on the screen which is a few rows and columns of 0's. Only visible on the whitest screens you can see it if your looking for it but its really faint.
Thanks guys
SOLD
Chassis: 2931
condition: slightest amount of black goop on the chassis the faintest amount of burn on the screen. Really cant see it even when your looking for it. This monitor had the anti glare coating removed and as a result its really bright even with the screen brightness turned really low. The unintended consequence of removing the anti glare coating is that now the colors seem to skew slightly green. Its just off and no matter what i did i could not get the white pure enough
Chassis: 2930
condition: Got this chassis from yhj and paired it with a tube I got from davesarcades the chassis does have a bit of goop on it which you could clean. As far as Ive seen these chassis are really durable and rarely ever have problems. The monitor is bright does have some burn on the screen which is a few rows and columns of 0's. Only visible on the whitest screens you can see it if your looking for it but its really faint.
Thanks guys
Last edited:
