What's new

FS Spring-ish Cleaning Pt. 2: PCBs (Ringedge 2 w/Multi, Taito Type X3, JAMMA Genesis, CPS2 Alpha 1 Blue

For Sale

100Proof

Professional
Joined
Aug 11, 2015
Messages
307
Reaction score
407
Location
NC
The closet cleaning continues. Not a match, struggle! These prices do not include shipping. Keep in mind that some of these items are very heavy and shipping could be expensive, especially if travelling coast-to-coast. With that in mind, this will be US/Canada only.

Ringedge 2 - In pretty good condition (you can see in the pictures that one of the brackets looks like it was bent during one of its long overseas trips). Comes with a power cord and an SSD drive with the multi on it. I also have the original HDD ATA key in case it needs to be re-enabled. I bought this for when I got an HD cab but ran out of space before I could get one so other than powering it up to make sure it works, I've done nothing with it. $250 + shipping SOLD

Taito Type X3 -
Similar situation. This one I don't have a multi for (though I gather the Artax multi is pretty easy to setup). This is a model 404 (Lord of Vermillion IV). It also comes with a power cord. Other than powering it up (which it does), I've done nothing with it to test it (as LoV 4 doesn't work in a standard cab). $250 SOLD

JAMMA Genesis -
Made by our good friend Lemony Vengeance, a JAMMA compatible Model 1 Sega Genesis (no "High Definition Graphics"). Has stereo jacks and can play MD or Genny carts. Not really sure what these go for but it is tested and working. $100 SOLD

CPS2 Street Fighter Alpha Blue B-Board -
As it says. Blue B-board, a little ratty but it's tested and works. On battery (I would replace sooner rather than later). $90 SOLD
 

Attachments

  • RE2_back.jpg
    RE2_back.jpg
    133.1 KB · Views: 133
  • JAMMA Genny_top.jpg
    JAMMA Genny_top.jpg
    348.1 KB · Views: 144
  • JAMMA Genny_action2.jpg
    JAMMA Genny_action2.jpg
    168.8 KB · Views: 145
  • JAMMA Genny_action.jpg
    JAMMA Genny_action.jpg
    154.6 KB · Views: 150
  • TX3_top.jpg
    TX3_top.jpg
    394.8 KB · Views: 123
  • TX3_front2.jpg
    TX3_front2.jpg
    169.5 KB · Views: 101
  • TX3_back.jpg
    TX3_back.jpg
    112.4 KB · Views: 94
  • RE2_top.jpg
    RE2_top.jpg
    451.5 KB · Views: 85
  • RE2_SSD.jpg
    RE2_SSD.jpg
    193 KB · Views: 87
  • RE2_front.jpg
    RE2_front.jpg
    140.2 KB · Views: 93
Last edited:
Ahh shit. I took pics of the Alpha board but they didn't make their way in to the post. I'll add those when I'm done working for the day.
 
Alpha 1 pics (it's definitely missing a few of the bolts/screws that are usually in B-boards... unfortunately, that's how I got it). It's bargain priced for a reason folks.
 

Attachments

  • A1_bottom.jpg
    A1_bottom.jpg
    141.5 KB · Views: 68
  • A1_jamma.jpg
    A1_jamma.jpg
    138.8 KB · Views: 70
  • A1_screen.jpg
    A1_screen.jpg
    135.3 KB · Views: 62
  • A1_top.jpg
    A1_top.jpg
    131.5 KB · Views: 67
Got a few takers on the Genny and the Alpha board so assume those are taken. Just got a Ringedge 2 with Multi left. Come and get 'em!
 
Just some positive feedback and a bump for a great seller.

@100Proof shipped out the TTX3 the next day, sent tracking and I got it a couple days later. All wrapped up and padded nicely. Was even better than described, I literally dropped in the Artax multi SSD, plugged it up in the cab and booted straight into the menu. All connections seem good and it was very clean.

With so many BS artists selling stuff, (not here of course) was nice to get something from an old school "under promise and over deliver" type. Good dude to deal with.
 
Back
Top