Strider roms

[Howie2673]

trying to burn new eproms for strider. But my burner is not compatible with mbm27c1000-20oz. Roms. Using the minipro burner. What roms would be compatible with this and is there a better burner out there

 

[Derick2k]

I dont think its the roms. You have a jedec / non-jedec issue.

Program it as a MX27C100, but...

You have to swap pins 2 & 24 to be able to program it.

Alternatively, you can buy MX27C100 eproms which you can program but you have to swap pin location at the pcb.

Here are the 2 datasheets so you can look at the pinouts.

 

[Howie2673]

how do you swap the pins on pcb

 

[Sp33dFr34k]

You could use one of @rsignal s adapters if I'm not mistaken.

 

[Derick2k]

If you cant get the adapter or want to mess with jumpering the lines in your programmer, I might have some spare mbm27c1000 or similar I can program and send your way. Ill check when i get a moment.

 

[Howie2673]

that

 

[Howie2673]

If you cant get the adapter or want to mess with jumpering the lines in your programmer, I might have some spare mbm27c1000 or similar I can program and send your way. Ill check when i get a moment.

that would be awesome. I cant get the adapter, he's not shipping due to everything that's going on now. I do have the original 27c1000 that I need burned

 

[Derick2k]

If you cant get the adapter or want to mess with jumpering the lines in your programmer, I might have some spare mbm27c1000 or similar I can program and send your way. Ill check when i get a moment.

that would be awesome. I cant get the adapter, he's not shipping due to everything that's going on now. I do have the original 27c1000 that I need burned

email/link me the the roms you want burned and I'll see what I have.