hernan43
Student
I have a Suzo Happ Power Pro 110V PSU(80-0064-00):
https://na.suzohapp.com/products/power_supplies/80-0064-00
I've started a VERY WIP cover for it here:
https://www.thingiverse.com/thing:4950743
Originally it was designed for a snap in IEC socket like this one:
https://www.amazon.com/gp/product/B081VD1NNT/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
However my face thickness on the print was ever so slightly thicker than what the tabs would allow for, so I ended up using a screw-style socket like this:
https://www.amazon.com/gp/product/B07RQV2NPN/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
I've adjusted the STL to have a slightly thinner face thickness, and have also slightly moved some of the screw holes. I have NOT tried this version of the STL though. The adjustments were so minor though I am confident it should be fine.
I am not the greatest designer in the world and I am certainly not an electronics expert so print at your own risk.