System 246 or 256 to play Cobra The Arcade?

[deeplone]

Thanks @defor your information helps a lot. Still a mess for a rookie like me.

The card reader checks can be bypassed although I HAVE gotten lockups on game over/clear without it present, so YMMV.

Is this possible to play all chapters without connecting the cardreader? How? Can you explain the details please?

And where I can find the whole pages of this Cobra The Arcade Service Manual? Can't do the other connection thing without pinmap.

 

[FelizGato]

Finally finished setup cobra the arcade. I use OpenJVS because irs and gun are expensive. This game is fun!

 

[chacal231077]

Hi!

You can develop to Set UP please.

 

[FelizGato]

Hi!

You can develop to Set UP please.

Do you want me to show my setup? Did I get your words right?

 

[Mrhide]

Do you want me to show my setup?

yes please

 

[ArcSys101]

Yes Please

 

[FelizGato]

 

[Mrhide]

so the wii bar is plugged to the stripped usb / rs485 ?

 

[FelizGato]

so the wii bar is plugged to the stripped usb / rs485 ?

To USB port on rpi

 

[chacal231077]

An idea to connect a The GunCon controller or GunCon 2 with MP07-IONA .

I managed to connect the MP07-IONA with Cobra The Arcade, but with the Arcade stick it's death LOL

With an Arduino and a DFRobot IR camera it is possible as in this link ?

Ultimate IR Lightguns with recoil

 

[FelizGato]

An idea to connect a The GunCon controller or GunCon 2 with MP07-IONA .

I managed to connect the MP07-IONA with Cobra The Arcade, but with the Arcade stick it's death LOL

With an Arduino and a DFRobot IR camera it is possible as in this link ?

Ultimate IR Lightguns with recoil

Have you tried using dualshock 2?

 

[chacal231077]

no it does not work with the dualshock 2

 

[FelizGato]

no it does not work with the dualshock 2

Are you sure? On the dongle there is a "PADMAN" - dualshock 2 driver. So in theory it's supposed to work.

 

[Franco23444]

Are you sure? On the dongle there is a "PADMAN" - dualshock 2 driver. So in theory it's supposed to work.

It doesn’t actually seem to do much and that’s expected as these are arcade games not games for home use (design wise). On the 2X6 games, I have noticed that when you hook up a controller to the ps2 ports/ controller adapters for the 256, some of the buttons “work” but you can’t aim or use the controller to add coins and such. I’m sure with a bit of time and effort, someone can mod the PADMAN driver to fully add controller support to the games

 

[FelizGato]

It doesn’t actually seem to do much and that’s expected as these are arcade games not games for home use (design wise). On the 2X6 games, I have noticed that when you hook up a controller to the ps2 ports/ controller adapters for the 256, some of the buttons “work” but you can’t aim or use the controller to add coins and such. I’m sure with a bit of time and effort, someone can mod the PADMAN driver to fully add controller support to the games

What a disappointment

 

[ArcSys101]

The original cobra that I have uses a FCA2 board i/o and working great

 

[FelizGato]

no it does not work with the dualshock 2

I'm a bit late, but I've managed to play it with dualshock 2

View: https://youtu.be/DptmJ6R_xs4?si=VH7irMgFjjXDJD0L

 

[nem]

Very cool!

 

[Dhampird]

I´m trying to figure out the diagram, i just get a 256 and the JVS Namco and learning how conect all, problem: get the ODE v3 and maybe the 2x6 pcb or others seems be difficult because no stock for now, if anyone knows about that parts let me know, thanks a lot, if you see any errors let me know, i saw different configurations or ways to make this works and is complicated make and idea without system or other parts here. Regards.

If you want see picture bigger try here: https://postimg.cc/ct32qdhB