What's new
By:
Filters

WTB Taito JVS K91X1097C e: Got one

Want To Buy
pzlate

pzlate

Enthusiast
Joined
Aug 4, 2016
Messages
206
Reaction score
85
Location
NorCal
e: Got one of yaj for around $80, a bit more than I would have liked but oh well.


Looking for the K91X1097C PCB so I can run JVS and Fast I/O off the same Jamma harness. It's this board on the top
Mwj5Fwy.jpg
 
Last edited:
Stuff this new you're usually best off to just go straight to Taito.

I certainly wish you luck on the second-hand market though. It's just generally slim pickings.
 
Expect to sell an arm and a leg when going to Taito, did an enquiry once for the Sega to Fast IO conversion board and harness, was over €400 without taxes and shipping...

But nice board, didn't even know this existed!
 
Some things can definitely be pricey.

Others are fair enough all things considered. Especially if you legitimately cannot find it anywhere else.
 
rewrite said:
Stuff this new you're usually best off to just go straight to Taito.

I certainly wish you luck on the second-hand market though. It's just generally slim pickings.
Click to expand...
lol Bally said I could have on repaired for 52K yen.

I saw one sell for 2000 yen on YAJ, but it was at a time when I didn't need one, kinda regret it now. I mean I have the Taito -> Sega conversion pcb so I could always go the Sega route. Or if the pinout is the exact same, I could maybe just cut out notches for the hirose harness and plug it into a sega i/o directly.
 
You must log in or register to reply here.
Back
Top