chacal231077 Grand Master Joined Dec 21, 2017 Messages 750 Reaction score 281 Location France Jan 24, 2019 #1 Hi! I need help for not all burnt what is the good connection made Thanks
Niko Champion Joined Sep 22, 2015 Messages 1,189 Reaction score 1,884 Location Louisville, Kentucky Jan 24, 2019 #2 its printed on the silkscreen just below the connector Make sure you connect the two reserved pins to the I/O card
its printed on the silkscreen just below the connector Make sure you connect the two reserved pins to the I/O card
chacal231077 Grand Master Joined Dec 21, 2017 Messages 750 Reaction score 281 Location France Jan 24, 2019 #3 ok as on your diagram ?
Niko Champion Joined Sep 22, 2015 Messages 1,189 Reaction score 1,884 Location Louisville, Kentucky Jan 24, 2019 #4 correct, those red pins need to go to the I/O card. IIRC you really only need the power and ground.
chacal231077 Grand Master Joined Dec 21, 2017 Messages 750 Reaction score 281 Location France Jan 24, 2019 #5 can you tell me if it's okay On the other hand for the Power Led the + & the - are independant in which order they must be connected
can you tell me if it's okay On the other hand for the Power Led the + & the - are independant in which order they must be connected
Niko Champion Joined Sep 22, 2015 Messages 1,189 Reaction score 1,884 Location Louisville, Kentucky Jan 24, 2019 #6 That is correct. I'm not sure on the HDD/Power LED polarity but I think its - +. Even if it's wrong it wont hurt anything, and you just switch it if it doesn't work.
That is correct. I'm not sure on the HDD/Power LED polarity but I think its - +. Even if it's wrong it wont hurt anything, and you just switch it if it doesn't work.
chacal231077 Grand Master Joined Dec 21, 2017 Messages 750 Reaction score 281 Location France Jan 25, 2019 #7 Yhaaaaaaaaaaa https://drive.google.com/file/d/1DdOMV0m-E8XMnteYoXZI4sSRg4NQGFSV/view?usp=drivesdk
Niko Champion Joined Sep 22, 2015 Messages 1,189 Reaction score 1,884 Location Louisville, Kentucky Jan 25, 2019 #8 Nice man, glad you got it working.