Taito VS kit PCB k91X1115B

[jbrlll]

Hello, Linking two Vewlix off one TTx2 running orig SSFIV:AE, one cab running JVS k91x1147A and 2nd cab running JVS k91x1097c . The Link PCB K91x1115B has d-sub from TTx2 into ‘V’, V1 and V2 out to each cab. Audio from TTx2 into VS PCB ‘L’ with L1 and L2 supplying each cabs Taito sound card. Vs kit PCB has 4 pin power connector from Vewlix harness. Video and sound all works and synced perfect.

My trouble is a JVS error 0005: connection out of spec. I have tried running the JVS usb directly from TTx2 into link PCB J1, out from J2 link PCB into first cab JVS J1, out from first cab J2 into cab two J1 JVS card. And I’ve ran the same route but first into cab one JVS then into link PCB then into cab two JVS...both setups run into JVS error 0005 and as soon as I disconnect the second cab JVS card it boots right up. It runs perfect with only one cab (either cab running solo JVS). I cannot find a manual.
cheers.

 

[nem]

Do the simplest connection first, skip the VS boards. Try connecting the TTX2 JVS in to JVS IO #1 J1, and then connect a cable from JVS IO #1 J2 to JVS IO #2 J1. That's everything that is needed. Make sure your cables are OK.

If it still isn't working, then I guess the IOs are incompatible. If it does work, then you have you either mucked something up with the VS board connections or maybe one of them is faulty.