A
Apocalypse
Recently I found motivation to have a go at repairing CPS1 hardware. As most of you know, the most common failure are the custom chips, only 2 on the system: the CPS-A-01 on the A-board and the CPS-B-xx on the C-board.
I think I had the discussion before with several members about how I make sure a chip is bad without having to resolder it on a known working board. Answer is below:
FYI ALL the chips I've tested during this recent repair attempt were faulty...
I think I had the discussion before with several members about how I make sure a chip is bad without having to resolder it on a known working board. Answer is below:
FYI ALL the chips I've tested during this recent repair attempt were faulty...