DARKSOFT The Definitive Guide to Fixing Your CPS2 Multi Kit

[Mitsurugi-w]

@Darksoft , please design a pcb for buffer testing.

 

[cruzlink2]

Congrats!! Probably just one of them was bad. Keep the ones you removed just in case.

I am sure but I was not gonna take them out one by one by one, I had enough so I said fuck it shotgun!.

 

[Darksoft]

Hi, had the cps2multi from saveyourgames.it since day 1 and working fine, last play was around 3weeks ago.
Fired it up tonight and got greeted with an "eeprom error" message from SSF2T New Legacy.
Reseated all the boards with no bent pins or any abnormalies from visual inspection of the boards.
Tried to flash 1944 (black screen on boot) AVP (a wall of error addresses) and lastly Choko (Ceeprom error, attached pic for reference)
How could I rectify this issue?

Any help appreciated

Usually an EEPROM error, means that the problem is with A or B Board. Do you have another one to try on?

 

[Hareluya]

Usually an EEPROM error, means that the problem is with A or B Board. Do you have another one to try on?

I have a spare A board (with some garbled graphics) from my old house, will fetch it during the weekend for some testing and report findings.