FOUND Things for reproduction: NNC/NUC bolt cover

[rewrite]

Definitely need the top top of the LS30 to be in fantastic condition since it has that logo on it. The octagonal bit I can get away with some cosmetic damage. Don't need the stick, just the yellow bits!

Also looking for an unbroken NNC bolt cover. Just one, in pretty solid shape, doesn't need to be perfect, but needs to be 100% intact.

 

[rewrite]

LS-30 handle mostly found. Knob and cap secured, but faded. Will worry about color matching with a nice one down the line.

 

[rewrite]

Still need a cover!

 

[twon]

Are you talking about the little plastic covers on the bezel to cover the screws that hold the bezel in place. I saw a post recently that twisted symphony 3d prints them and he left the schematic there to if you want to print them yourself

 

[JohnRambo'sKnife]

Do you still need a cover for modeling?

 

[rewrite]

Do you still need a cover for modeling?

Are you talking about the little plastic covers on the bezel to cover the screws that hold the bezel in place. I saw a post recently that twisted symphony 3d prints them and he left the schematic there to if you want to print them yourself

@twistedsymphony said that he adjusted the size to accommodate for 3D printing, so that wouldn't have worked.

I did find one to borrow and got to get all the measurements off of it @JohnRambo'sKnife ! Thank you though!

 

[twon]

Might have to get some printed I’m missing all 4