StarrGroove
Student
Hey everyone, I recently purchased a TTX3 that I am trying to troubleshoot, but not having much luck with. Below are the system specs:
Model 405
i3 2120 3.3ghz
2gb RAM
N640
I've tried all the basic stuff:
Tried all ports DVI, VGA, HDMI on multiple working monitors.
Cleaned and reseated edge connectors on RAM, video card, and I/O connections.
Tried multiple hard drives.
Everything is connected, all fans are running.
Dip settings: 1 is on 2-4 is off
It sounds like the system is restarting every 3-5 minutes. When fans are running the red light is lit up on the I/O board, when everything powers down for the restart it switches to green.
The board itself looks surprisingly clean, no blown caps or leakage that I can see.
Thanks for taking the time to give this a look, I appreciate any assistance.
Model 405
i3 2120 3.3ghz
2gb RAM
N640
I've tried all the basic stuff:
Tried all ports DVI, VGA, HDMI on multiple working monitors.
Cleaned and reseated edge connectors on RAM, video card, and I/O connections.
Tried multiple hard drives.
Everything is connected, all fans are running.
Dip settings: 1 is on 2-4 is off
It sounds like the system is restarting every 3-5 minutes. When fans are running the red light is lit up on the I/O board, when everything powers down for the restart it switches to green.
The board itself looks surprisingly clean, no blown caps or leakage that I can see.
Thanks for taking the time to give this a look, I appreciate any assistance.