WTB Vewlix Marquee
- Thread starter asr10user
- Start date
Want To Buy
I use these on my C's. very happy with them.
Kidkaos
Champion
You try the Amazon ones? I'll try to find a link.
Edit:
This guy
https://www.amazon.com/Horizontal-W...p_m_grid_dv_rp_0_1_ec_ppx_yo2_mob_b_ts_rp_2_i
I use it on my F.
Edit:
This guy
https://www.amazon.com/Horizontal-W...p_m_grid_dv_rp_0_1_ec_ppx_yo2_mob_b_ts_rp_2_i
I use it on my F.
Kidkaos
Champion
I assume you're not simply buying this one because you want to pay less money than that. Truthfully if you want cheaper you need to either accept an alternate, like Kidkaos posted, or make your own.
The files are available, and you can simply take them to a local plastic shop and have them laser cut them.
But once you pay for the materials, the shop time, and buy the hardware you're not going to save a ton of cash. But it will be less.
I think I found one locally, but thanks this would totally work.
Appreciate that! My buddy is actually going to purchase a cab from KC and I gave him a call to see if he had some to sell and he did. If that dosent work out i'll look at alternatives.I made my own btw, it's definitely not hard. I have the files if you need them.
tDRG
Grand Master
If you go the homemade route, I used two of these 3/32" sheets from Home Depot. Not exactly the same thickness as the originals but $35 total:
https://www.homedepot.com/p/OPTIX-18-in-x-24-in-x-0-093-3-32-in-Clear-Acrylic-Sheet-MC-05/202038047
https://www.homedepot.com/p/OPTIX-18-in-x-24-in-x-0-093-3-32-in-Clear-Acrylic-Sheet-MC-05/202038047