What's new

lasombra49

Beginner
Joined
Aug 4, 2023
Messages
5
Reaction score
0
Location
Florida
Hello guys. I recently did a little restoring on a Wangan Midnight Maximun Tune 3 Single Cab and am having issues with the card reader. It prints out and gives out cards ok, but when you try to move forward it gives you a data save failure error (E52 card could not be saved) all the time. Tried going into Test Menu to read write data test and it says data save failure, if I do check card data it says this card cannot be used, please take card. If I do restore card data it has the 2 save files on top (which means it hasnt been written on the card yet) and you can choose which to restore, but when you try and do it, it says card could not read, so I'm kinda stumped here. I'm gonna take it out and clean it, but any advice or anything that could be pointed out as to how to fix it would be greatly appreciated. I recently bought 25 blank cards from an ebay seller and was very excited to play it, well, back to square one with that :(. Thanks and may you guys have an amazing day.
 
Back
Top