hatmoose
Enlightened
Hi Everyone;
I'm making my own CPS2 digiAV from this project as a learning excercise
https://github.com/marqs85/cps2_digiav
The Cyclone 10 FPGA's are hard to get right now.
Before I order these off ebay does anyone have any kicking around that they want to sell?
Alternatively if you have a bunch of chips and want a completed CPS2 digiAV board maybe we could reach some arrangement where you send me the chips and II send you one of the completed boards? This might require a higher level of trust than my trader feedback (none) would support so you'd be taking a risk there
Ideally
10CL025YE144C8G
but also would work too
10CL025YE144I7G
Also, to add another wrinkle I am located in New Zealand which is a tiny island in the middle of nowhere, So Aussie or USA shipping is not too awful. Anywhere else and this might not make a lot of sense.
Very slightly related picture of the bare boards for attention
I'm making my own CPS2 digiAV from this project as a learning excercise
https://github.com/marqs85/cps2_digiav
The Cyclone 10 FPGA's are hard to get right now.
Before I order these off ebay does anyone have any kicking around that they want to sell?
Alternatively if you have a bunch of chips and want a completed CPS2 digiAV board maybe we could reach some arrangement where you send me the chips and II send you one of the completed boards? This might require a higher level of trust than my trader feedback (none) would support so you'd be taking a risk there
Ideally
10CL025YE144C8G
but also would work too
10CL025YE144I7G
Also, to add another wrinkle I am located in New Zealand which is a tiny island in the middle of nowhere, So Aussie or USA shipping is not too awful. Anywhere else and this might not make a lot of sense.
Very slightly related picture of the bare boards for attention
When I get a response from them I will be sure to share it here