Wanted Naomi 2 PSU helpp

[Arcade Daze]

Greetings from TX, recently acquired a Naomi 2 motherboard with netdimm set-up. Wanted to throw this setup into my Sega blast city but I've read the Naomi 2 needs own power supply. If someone could point me in the right direction to get this project going please. I need PSU, Sega IO board, any cables to connect to JVS cab. Thanks peeps

 

[twon]

If your blast has a 001 loom then you don’t need a dedicated psu. If you don’t then you could use a Sun psu, or an Atx psu with an adapter. You’ll need ether a Sega I/o or capcom I/o. People say the capcom I/o adds 1 frame of lag although I run it and never noticed. You’ll need a printer style usb cable for the controls. Crossover cable for the net dimm to pi. Do you have a pi for your NetBoot setup? Zero pic?

 

[Arcade Daze]

Thank you for your reply! I'll have to check if it's the 001 loom. I've been seeing that the Sun psu is your safest bet but I've seen a lot of people use atx/adaptor. I do have a printer style USB cable , crossover cable, Sega JVS jamma adaptor and the pi ready to go. I have seen the Sega IO floating around here.