Williamcritchfield
Enthusiast
I noticed im missing a ground on my ms2930 chassis and I don’t have a clue what this connector is called so I can make one. Can someone help me out with what it’s called. Thanks
What is this connector called
- Thread starter Williamcritchfield
- Start date
DelsArcade
Professional
ArcadePartsandRepair carries that.
Here is the housing:
https://www.arcadepartsandrepair.co...-connectors/1-pin-plug-housing-2-36mm-cp1000/
Here is the molex pin (you need a crimper of course):
https://www.arcadepartsandrepair.co...-pins-female-18-24-awg-10-pack-cm1006-cp1011/
Del
Here is the housing:
https://www.arcadepartsandrepair.co...-connectors/1-pin-plug-housing-2-36mm-cp1000/
Here is the molex pin (you need a crimper of course):
https://www.arcadepartsandrepair.co...-pins-female-18-24-awg-10-pack-cm1006-cp1011/
Del
Last edited:
trashedcabs
Grand Master
The connector model is called TJC1 and they can be found all over Chinese marketplaces. These are commonly used for yoke connectors.
https://www.aliexpress.us/item/3256808722090683.html
The smaller pitch version is called TJC2, and is used for the yoke connectors on some monitors.
https://www.aliexpress.us/item/2255799963388535.html
https://www.aliexpress.us/item/3256808722090683.html
The smaller pitch version is called TJC2, and is used for the yoke connectors on some monitors.
https://www.aliexpress.us/item/2255799963388535.html
Williamcritchfield
Enthusiast
Thank you so much!!
Williamcritchfield
Enthusiast
Thank you for making that easy and helping me to avoid tarriffs thought I was going to have to get from china