What's new

vholfx

Student
Joined
Sep 12, 2019
Messages
70
Reaction score
52
Location
USA
Hello,

I got a nice looking Winning Eleven 2010 cabinet in non-working condition. There's little to no info about this game and cabinet (that I could find), let alone the hardware (which is Konami PC based), so I thought it would be cool to share whatever I find along the way. Winning Eleven 2010 is not even listed in the Konami PC based hardware wiki, it lists up to WE2008. Here's the cab in question.

20230503_172101.jpg 20230503_172115.jpg20230503_172123.jpg

The cabinet powers on, but there is no image or audio. However there is a bios beep code, so I took the PC out for further troubleshooting.

20230503_172203.jpg20230503_185617.jpg20230503_185630.jpg20230503_185622.jpg

Turns out, from what I gather, it uses the same mother board as some of the Taito Type X2 systems, it is a TEM100-01B (could not find the manual).

20230503_184025.jpg

With that info and this post by a nice fellow I found the corresponding issue for the Beeping code, which is 4-2-3-3 (Extended Block Move), according to google, it is related to the graphics card, so I took it out, plugged the video cable to the integrated VGA output and.... it booted! (with errors)

More to follow.
 

Attachments

  • 20230503_172111.jpg
    20230503_172111.jpg
    324 KB · Views: 48
Last edited:
20230503_185713.jpg20230503_185725.jpg

So the machine now boots but there are two errors being thrown at the moment.

The first is a "new hardware" window, don't know why because I did not plugged in any new hardware yet (I did swap the rams from one slot to the other before pulling out the video card, basic PC troubleshooting). Then the game tries to boot and a memory error is thrown

20230503_190658.jpg20230503_190718.jpg

I had an NOS ATI card laying around, I gave it a try and the system boots just fine. I also get video output from the video card, but I still get the two windows above.

Here is the new card, pretty bare bones

20230503_190453.jpg

Keyboard and mouse works during the initial window start but as soon as the scripts kick in, keyboard and mouse is locked out, which I expected.

This is how far I got today, I suppose I can try to source the same video card so no new devices are detected, but since the same window was showing even without a new video card, I doubt that will even help.

Any thoughts, ideas or input in general is greatly appreciated.
 
Last edited:
Back
Top