kazuyajin1080
Student
That's pretty fair to me especially since its already pre-assembled.
This is part of the problem. Shipping kills on low quantity orders.fine price for a usa buyer. Shipping just the components from digikey would cost me $9 in shipping alone!
Frank - PM me your address. I'll send you one free of charge to test out and give feedback. In the mean time. I have to tweak the through-hole slots for the RCA jacks and then I'll get the files posted somewhere.If you plan on releasing the Gerber files I'd be inclined to order PCBs myself and build it myself.
If you plan on releasing the Gerber files I'd be inclined to order PCBs myself and build it myself.Frank - PM me your address. I'll send you one free of charge to test out and give feedback. In the mean time. I have to tweak the through-hole slots for the RCA jacks and then I'll get the files posted somewhere.If you plan on releasing the Gerber files I'd be inclined to order PCBs myself and build it myself.
Stand up guy right here.Frank - PM me your address. I'll send you one free of charge to test out and give feedback. In the mean time. I have to tweak the through-hole slots for the RCA jacks and then I'll get the files posted somewhere.
Are there standoffs under the PCB between the case? How long at they? If the standoffs are as long as a standard PCB foot then you're good. If not, send me the measurements and I'll let you know.I'm very interested but I'm not sure if it'll fit on a ST-V PCB with the Lions3 case installed.
The standoffs are 3D printed. The bottom one you could say is a sleeve I guess? A screw goes through it and screws into the longer standoff on top.Are there standoffs under the PCB between the case? How long at they? If the standoffs are as long as a standard PCB foot then you're good. If not, send me the measurements and I'll let you know.I'm very interested but I'm not sure if it'll fit on a ST-V PCB with the Lions3 case installed.
Edit: I took a quick look at some pics, looks like the standoffs are really short and I can't tell if they are true standoffs or sleeves for screws. I need more details, but one option is to replace the existing standoffs with slight longer ones.
You have my sympathy. I've gone through that a couple times. It is tough.Sorry, I lost some motivation the last few days. I had to put my dog down...
My Titan ST-V already has a daughter board that attaches right where your new design goes.I had started working on another design for this that would incorporate a CPS2 kick harness. I'm hoping this can drop in without screws to where the original IO board is. I think this would also solve the issue for people with a case.
The board would mount on the CN21 and CN25 headers and have a wire harness running to CN24 for audio.
My condolences just remember that we can always wait until you feel you are able to make these boards. No need to rush the process. I do like the design of your board thoSorry, I lost some motivation the last few days. I had to put my dog down... I should be able to build some boards this week and respond to those who were interested in purchasing one.