JNX Namco 2X6 Kick Harness Adapter

[XianXi]

This is the Namco 2X6 Kick harness adapter. Like the other JNX kick adapters, it supports CPS1, CPS2, Midway H1, F3 and STV.

The 2X6 is made for the Namco 246 and 256 systems with the 10pin kick connector.

There are 2 sets of 10 pin sockets, 1 set is specifically for the two Capcom fighters on the systems (Capcom Fighting Jam and All Stars). These two games have a different pinout than the rest of the games.

Simply connect your kick harness onto the 2X6 then slide it on to the PCB using the appropriate 10 pin connector.

Current price for the adapter (With both CPS1 and CPS2 connectors): $16

 

[bagheera369]

Knockin it out of the park as always brother. Way to go.

 

[XianXi]

Knockin it out of the park as always brother. Way to go.

Thanks dude

 

[Dreamstate]

Hey, bought one of these, but I am not having any luck getting buttons 5 and 6 working on Fighting Jam. I have the CPS2 kick Harness but neither 10 pin are giving me buttons 5 and 6. It seems like the bottom 10 pin is the right one. Any ideas?

 

[XianXi]

Hey, bought one of these, but I am not having any luck getting buttons 5 and 6 working on Fighting Jam. I have the CPS2 kick Harness but neither 10 pin are giving me buttons 5 and 6. It seems like the bottom 10 pin is the right one. Any ideas?

Hey dude,

For the Capcom boards it’s the top 10 pin connector.

 

[Dreamstate]

I am still having issues, but I am going to try a few more things. Thanks for clarifying the setup for me.