Sure can. The ATX pinout is standard.Is it possible to use PicoPSU's with these adaptors?
Are these still available?Price is $25
This high-quality, hand-crimped adapter will allow you to power your entire Naomi setup including the main pcb, DIMM or NetDIMM, and GD-rom or CF Kit (with separate cable) using a standard PC ATX power supply. This adapter is wired by default to power on automatically when you power the ATX supply but there is an option available for leads to allow you to mount an external power button. This adapter runs a wire from EVERY SINGLE 5v, 12v. 3.3v and Ground connection on the 24-pin ATX connector for more robust voltage control to prevent starving the Naomi of the necessary power.
Adapter shown is wired for auto-power when ATX power button is flipped on
Yes. PM Mitsurugi.Are these still available?
lol so its bad timing I launched my tutorial on how to make them at home today then eh? Better hoard my remaining pinsI'm going to have to stop selling these for awhile soon. There is zero stock of any of the compatible pins anywhere. JST will not allow an order because the demand is too high. Expected restock in the usual suppliers such as Mouser and Digikey is 2023. My last ditch effort to secure more was a seller on Amazon but they just refunded my order because they were out as well.
If anyone else who is making these has a few hundred pins they would sell please let me know. Though I doubt anyone will neuter their own sales. The pins for the ATX side are getting scarce too but I was able to get another reel. Too bad they aren't worth much to my without the other pins for the JVS side...
I've been trying to reorder for months but this is by far my most popular adapter I sell and parts have simply run out. I have a handful left and I'll save the last 40 or so pins I have for emergencies.lol so its bad timing I launched my tutorial on how to make them at home today then eh? Better hoard my remaining pins
I have the same issue with Beast Busters: Second Nightmare conversions. Ive done two for people and I can't even get the pins...I have to buy pre crimped test leads and cut them for the projects.I've been trying to reorder for months but this is by far my most popular adapter I sell and parts have simply run out. I have a handful left and I'll save the last 40 or so pins I have for emergencies.
I scoured the net for any stock I could find and there just isn't any.
In my biased opinion a 10/10. Shit is just straight action from start to finish. Great gore too...and I have "located" one of these. Perhaps in my future. How's that game anyway?
Anyone have any recommendations for PSU along with these wires?
I had two cheaper 450W PSUs that USED to work fine with all this, but then I started to get super weird issues. Seems like when netdimm is present I get no video output, but if I disconnect netdimm I get video. This occurred for both Naomi and Chihiro.
When I plug them into Sun PSU they all boot fine. So I assume these 450W PSUs are not up to the task anymore (even though they used to work just fine).