Thanks! What should the default values be?Are you sure you are turning them the right way? Clockwise is turns down resistance. Anti clockwise turns up resistance.
Also, make you use a multimeter instead of eye balling the levels on screen. There are test points for the RGB lines so you can ohm out the levels for each R/G/B channel.
475 ohmsThanks! What should the default values be?
Maybe they have same problem I had?I don't get why you guys are having issues. Let me ask this, when you connect a console up through SCART, do you have any issues with over-driving your monitors?
I will try this and report back. I was only using the VGA hat.I don't get why you guys are having issues. Let me ask this, when you connect a console up through SCART, do you have any issues with over-driving your monitors?
I’ve tried scart, vga hat, multiple console systems, a completely different arcade cabinet, and no input at all connected. It is still over driving.I don't get why you guys are having issues. Let me ask this, when you connect a console up through SCART, do you have any issues with over-driving your monitors?
Just curious, which monitor do you have?Mine is from the original run, Sept 2019.