So I've been playing around with a few analog games to record the channels and I need some clarification on your chart as to the definition of "min" and "max" is that min and max voltage or min and max resistance? or is it min and max HEX value (which I've discovered is sometimes the inverse of the incoming voltage and other-times not)
voltage makes the most sense to me, but I want to be clear.
-------------
Also, I tested out Sega Marine fishing since it's a real odd-ball and only seems to work with a type 2 I/O board.
I'm not going to add this one to the chart since I don't have the right connectors for the digital controls and it'd be near impossible to actually determine which "Direction" each of these analog controls work but if anyone is interested here is what I confirmed in test mode:
A0 pull position
A1 swing position
A2 stick X
A3 stick Y
A4 reel speed
A5 tension
--------------
ooh new fun discovery.
club kart's steering is backwards
also the analog steering data is 16 bits instead of 8
voltage makes the most sense to me, but I want to be clear.
-------------
Also, I tested out Sega Marine fishing since it's a real odd-ball and only seems to work with a type 2 I/O board.
I'm not going to add this one to the chart since I don't have the right connectors for the digital controls and it'd be near impossible to actually determine which "Direction" each of these analog controls work but if anyone is interested here is what I confirmed in test mode:
A0 pull position
A1 swing position
A2 stick X
A3 stick Y
A4 reel speed
A5 tension
--------------
ooh new fun discovery.
club kart's steering is backwards
also the analog steering data is 16 bits instead of 8
Last edited: