Chassis Nanao Ms 9 - 29
Maybe someone can advise where to look for the error..
I bought a Sega Rally twin, I've had it for 2 years.
Both monitors had a vertical collapse, I fixed them by replacing them (vertical chip) and replaced all the capacitors.
They worked very well, only the right one started doing this after cleaning the chassis:
I tried replacing the remote board
Remelted the solder on the chassis
Change the neck board from a good monitor and still the same error,
the potentiometer( chassis )(Horizontal expansion controls only a little).
Please, can someone advise where to look for the error?
Maybe someone can advise where to look for the error..
I bought a Sega Rally twin, I've had it for 2 years.
Both monitors had a vertical collapse, I fixed them by replacing them (vertical chip) and replaced all the capacitors.
They worked very well, only the right one started doing this after cleaning the chassis:
I tried replacing the remote board
Remelted the solder on the chassis
Change the neck board from a good monitor and still the same error,
the potentiometer( chassis )(Horizontal expansion controls only a little).
Please, can someone advise where to look for the error?
Attachments
Last edited: