Hatsune Mike
Champion
In my experience the Hitachi tube doesn’t benefit much from this
I was about to do the enhancement mod on Hitachi after capkit...and when I compared it to the toshibas, I refrained myself since it looked sooo good already.In my experience the Hitachi tube doesn’t benefit much from this
Thanks. I guess I'll go and check the chassis that I've installed on cabs. maybe I'll find one that is similar to what you guys used. Just too much work to try and figure it out with these spares I have.You can do it on any of them fundamentally, but sure enough it's possible the jumper name is different or gone. Ultimately you just want to isolate that neck pin from ground and instead substitute the G1 voltage.