Did you get this to work Fluffy? I'd be happy to help (if I can), I have a bootleg copy of the game, an MV1B board and a supergun to test it out, my cabinet is back in Spain but with some time I could get to test it with that too.I am now on holiday until next year. I'll try to ship the PGM PCB orders out, then find some room to set up the MVS to continue testing this.
I'd imagine official support for this board is based on the mobos that have have the output port. even if that port does supposedly have similar function to the joystick ports (though I'm not sure it's truly a 1:1) none of the official harnessing for the 4P board would work with the joystick ports anyway.I would like to know:
- which board support the 4p adapter? https://wiki.neogeodev.org/index.php?title=NEO-FTC1B_board mentions only mv1b and mv1c. Some boards with joypad ports could be made to work with an adapter.
It depends on if they route the "out" pins from D0 to the port, similar to an AES. No, the official harness won't support it, but if you can connect the Mahjong controller it should provide the correct signals and you could make an adapter.I'd imagine official support for this board is based on the mobos that have have the output port. even if that port does supposedly have similar function to the joystick ports (though I'm not sure it's truly a 1:1) none of the official harnessing for the 4P board would work with the joystick ports anyway.
Is it really the value of this kit?