Official: CPS1 (CPS1.5) Multi by Darksoft/Apocalypse - Interest Check Thread

[beast1x5]

https://www.siliconera.com/2019/03/10/fans-create-3-player-mod-for-final-fights-30th-anniversary/


if this mod works with the upcoming multi... I'll probably lose my mind

 

[twistedsymphony]

it says it works on actual cps1 hardware. So I see no reason it shouldn't work on the multi.

 

[opt2not]

The video states it works on real CPS1 hardware!

@ the 40 second mark:

 

[beast1x5]

SEXY TIME!!!!

 

[kuze]

The video states it works on real CPS1 hardware!

@ the 40 second mark:

Looks pretty sweet, so regular final fight in 3 player mode?

 

[Mitsurugi-w]

Now that is bad-ass.

 

[opt2not]

Looks pretty sweet, so regular final fight in 3 player mode?

yessir!

I assume they’re using the same 3P connection (CNIO 2) pinout that Knights of the Round does. Surely...

Edit: actually, now I’m going to have to update the CPS1-to-CPS2 kick harness adapter to use the 3rd player pinout. I guess I needed to do that anyway for the existing games.

 

[Apocalypse]

Edit: actually, now I’m going to have to update the CPS1-to-CPS2 kick harness adapter to use the 3rd player pinout. I guess I needed to do that anyway for the existing games.

Captain Commando uses 3p/4p controls from the C-board.

 

[opt2not]

Edit: actually, now I’m going to have to update the CPS1-to-CPS2 kick harness adapter to use the 3rd player pinout. I guess I needed to do that anyway for the existing games.

Captain Commando uses 3p/4p controls from the C-board.

yeah, looks like it’s using CNIO 1 and CNIO 2 on the C-Board. Knights of the Round uses CNIO 2 for player 3. So I’m wondering which one this Final Fight hack is using.

 

[Apocalypse]

yeah, looks like it’s using CNIO 1 and CNIO 2 on the C-Board. Knights of the Round uses CNIO 2 for player 3. So I’m wondering which one this Final Fight hack is using.

Not really important since they probably used the standard pin assignment Capcom used for 3p/4p games. In these games pinout is identical between CNIO1 and CNIO2.

 

[djsheep]

Seen a couple of CPS-1 boards on eBay Australia that might be good for anyone down under looking:

https://www.ebay.com.au/itm/Street-...cade-Circuit-Board-PCB-Works-100/202611524544
https://www.ebay.com.au/itm/Street-...rsion-Jamma-Arcade-Circuit-Board/202611603593

 

[KinG_SoPa]

Ready for the multi

 

[AGCRetrogaming]

Please I'm down for one.

 

[Stupid Dufus]

Put me down for one as well, please.

 

[UltraSean]

i will take one

 

[Cheatinn]

@Derick2k

Add me to the list please

Thanks

 

[JohnRambo'sKnife]

Please add me to the list. I am fine with prepayment.

Thanks

 

[XtraSmiley]

EDIT: Ok, I just missed all the posts about FF 3 player, so I'm late, but VERY COOL!

 

[Kagaden]

If all games are supported natively without modification, does that mean any A board will run all games on either frequency? I picked up a Dash Hyper Fighting board /

Thanks for all the incredible work into this Darksoft!

is there any more available where you got your A board from ?

Just monitor KLOV and Ebay until one pops up... they're still expensive though. Now I'm considering getting a second Dash board or a 10mhz board, what should I get? XD

 

[jassin000]

Now I'm considering getting a second Dash board or a 10mhz board, what should I get? XD

If you don't have a 10mhz short yet, I say get one.
I would however avoid the 10mhz longboard.