What's new
By:
Filters

Pop'n Music control panel for Sega cabinets

Fredo

Fredo

Enthusiast
Joined
May 3, 2018
Messages
97
Reaction score
196
Location
France
Hey guys !

A few months ago on Buyee, I bought that Pop'n Music control panel made by River Service.

panelPop.jpg


(I'm currently working on a new CPO)

It is equipped wit Sanwa OBSAT-60UMQ buttons (dome 60mm buttons).The microswitches were used, but they can easily be replaced by the microswitches from a JLF-TP joystick.

Capture.PNG



The arcade games can run in HD or SD (640*480p) so it's perfectly suited on my New Net City.

popnpeace.jpg


Although the buttons are smaller than the 100mm ones on the original cabinet, it's fully playable, and it's hell of a ton of fun, even for a noob such as myself !

 
A little update on this project:

I bought this upright Naomi Universal Cab for this game (just before lockdown), so people can play it standing up in events, and attached a Club Kart subwoofer to it to beef up the sound.

NUC Pop.jpg

(except from the NUC, those are not my cabs)

base_cut.jpg
base_cut2.jpg

A corner of the base panel has to be cut for the subwoofer to fit, but it improves the sound quality so much that I absolutely don't regret it a bit.

The Subwoofer is operated by this seperate 2.1 Amplifier
Sound Amp.jpg

https://www.amazon.fr/gp/product/B07DDL41P1/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1

Also, the woofer itself was old and rotten and I had to replace it, I chose this colorful baby and it works perfectly (10" 25cm 150W 8 Ohm):
subwoofer.jpg


https://www.amazon.fr/gp/product/B00U3N7D22/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1

I've also been working on a more suitable CPO and topper
mini Popn Panel custom 2.png


And on an artwork for a replacement subwoofer plexi:
mini Woofer.png


Will come back once those are printed and installed !
 
Last Week-end I finally had the opportunity to try my Pop'n Music CPO:
IMG_20230512_095546_resized_20230512_095816792.jpg


The panel was used on my NUC during the HFS Summer 2023 arcade event:
IMG_20230504_172529_resized_20230512_095817185.jpg


I had the opportunity to meet a great Pop'n Music player who has the official cab at home and tried my cab at the event with some level >40 songs, and although he made many mistakes because of his muscle memory needing to adapt to the new layout and smaller buttons, he found the panel totally playable !


So, here are my files:

http://fredo.sausage.free.fr/Overlays/Popn Panel.psd


http://fredo.sausage.free.fr/Overlays/Popn Panel final holes.png
Popn Panel final holes.png


http://fredo.sausage.free.fr/Overlays/Popn Panel final.png
Popn Panel final.png

Keep in mind I made it for my Sanwa OBSAT-60UMQ buttons, and I don't know if it'd fit with some other models.
 
Nice work. Thanks for sharing your hard work. I wasn’t able to see video’s unfortunately.
 
Thanks for sharing Fredo. I have an empty NUC cab (only screen is left). In first I wanted to dedicated it for Atomiswave USA sport shooting, but I have another guncab. So I rememberded of your PopnMusic I saw at HFS and I think I'll do this instead. Good to see a lot of thing are here, so I don't have to harass you with questions on HFS discord ;)
 
Very good work! What type of hardware runs this game!? I'm very tempted to throw this on one of my cabs 😉
 
Kidkaos said:
Very good work! What type of hardware runs this game!? I'm very tempted to throw this on one of my cabs 😉
Click to expand...
The latest arcade versions run on PC and do not require expensive hardware at all. Mine is a 2010 gaming laptop, connected to the cab's IO board with a JVSy.
 
You must log in or register to reply here.
Back
Top