What's new
By:
Filters

replacing scsi cd-rom drive with scsi sd card adapter?

welovegame said:
I used UniCD-CPS3_for_standard_SH2_V4.iso
Click to expand...
That doesn make sense. The error that you mention is 100% typical for this problem. If your cart was bad, you wouldn't even be able to write a game or see the menu.

Can you please double check and download the ISO again?
 
Darksoft said:
That doesn make sense. The error that you mention is 100% typical for this problem. If your cart was bad, you wouldn't even be able to write a game or see the menu.

Can you please double check and download the ISO again?
Click to expand...
It always shown Re-write game when I turn off and on again
 
Ohhh then one of your simms holding the code, those are SIMM1 or SIMM2, one of them or both are broken.
 
Yep that is one of the sh2 swaps I did many years ago. Haven't swapped an sh2 in at least 6 years.
 
Ok so if I want the Zulu2040, I need the board itself, and the ribbon cable, that's it, nothing else? since I am on the website and it has options here.
 
snake_eyes_ex said:
Got my ZuluSCSI yesterday. The install is incredibly easy.

These were my steps:
  • Use ImgBurn to create a .iso of my CPS3 Multi disc
  • Plug SD card into my card reader
  • Make sure the SD card was formatted correctly
  • Drag my CPS Multi disc iso into the folder of the SD card (card connected via a SD reader on my PC via USB)
  • Rename the disc image by adding CD1 to the rest of the file name (in my case CD1CAP-33S-1.iso)
  • Plug SD card into the ZuluSCSI
  • Unplug my CD drive from the CPS3
  • Plug the 50pin cable into the ZuluSCSI
  • Enjoy
I'll report back if anything changes, but so far so good.
Click to expand...
Sir,l followed your instructions and was successful, thank you!
 
You must log in or register to reply here.
Back
Top