- Thread starter haightc
- Start date
I wonder if the upcoming Forgotten Worlds spinner being made by @hursit would work on Taito F3?
skate323k137
Enlightened
I got an unidentified spinner some time back that did not work, so I replaced the optics PCB with the "happ red board" and the F3 works with it just fine. I know it doesn't help sourcing the full assembly but I can at least confirm those optics/electronics work.
https://na.suzohapp.com/products/trackballs/A052-1011-00
https://na.suzohapp.com/products/trackballs/A052-1011-00
A future version will support arcade/pc/mister emulation, etc.. The repro will be as capcom designed for now, unless we can do an add-on for it to work with others systems/setups.
The F3 is designed to work with any of the Taito 4-Gear Spinners (this includes Arkanoid Spinners, the Ghox spinner etc.)
I've compared the circuit and gear design of the Capcom Spinner and it is cross compatible, which means that the repo should be as well.
Fantastic!
Capcom and Ghox spinners FTWThe F3 is designed to work with any of the Taito 4-Gear Spinners (this includes Arkanoid Spinners, the Ghox spinner etc.)
I've compared the circuit and gear design of the Capcom Spinner and it is cross compatible, which means that the repo should be as well.
@twistedsymphony Ghox spinners are next in line.
Hi : let me know if the ghox spinners become available. I will be looking for a set and am looking for a ghox pcb. Im sure this will be a battle to find the pcb though.
Regards
Euphoria
Sorry for bumping an old thread, but would this spinner be a good fit for arkanoid on the F3? https://www.ebay.com/itm/333664491013
skate323k137
Enlightened
No need to be sorry if it is on topic
Sadly I don't think those will work as they emulate a mouse input for PC if I'm not mistaken. I doubt it would work, but the most lucky option would be if the spinner wires could be wired to jamma instead of their PCB. No idea if that spinner would create the proper pulses for an F3 like the happ red board does.
So could I use one of those arcade1up noname spinners and hook it up to the happ red board?
why spend $91 for a spin track when you can buy an original Taito Spinner for less? most are in the $50-$75 range depending on condition.
skate323k137
Enlightened
I was more hoping in theory the 4 wires from the spinner to USB board carried pulse signals eliminating the red board entirely, but I don't want to theorize too much. Hopefully someone else knows for sure.
where /when have you seen them for that? I can't remember when I last saw one under 500
KLOV Mostly
old listings from the time of my post:
two spinner lot for $150: https://forums.arcade-museum.com/threads/spinner-rotary-controls-lot-arkanoid-style.510881/
PCB+ a spinner for $175: https://forums.arcade-museum.com/threads/arkanoid-regular-pcb-spinner.506100/
$75: https://forums.arcade-museum.com/th...r-almost-new-75-shipping.497820/#post-4413746
$55: https://forums.arcade-museum.com/threads/blue-top-spinner.495802/
two spinner lot for $90: https://forums.arcade-museum.com/threads/arkanoid-spinner-x2.495428/
more recently:
$85: https://forums.arcade-museum.com/threads/arkanoid-spinner.518600/#post-4676555
$150: https://forums.arcade-museum.com/threads/arkanoid-spinner-complete-and-working.513692/#post-4676379
I'm curious where you're seeing these ABOVE $500? I bought a whole NOS Taito 2-player Spinner panel for $400 off of YAJ last year and the most I've ever seen a NOS still in the box Taito spinner sell for is around $300.
KLOV is the largest and oldest Arcade forum on the internet. Its worth being on there just for the marketplace
