I personally ordered the right angled adapter on AmazonSomewhat off-topic, but it sounds like angled display port/HDMI cables/adapters are required with the LG monitors. I need to use longer cables, so I'm looking at adapters rather than cables with angled connectors. Anyone have recommendations for adapters that support DP 1.4 and HDMI 2.1? Some claim to be, but you never know. Thanks!
This.As long as it's a relatively normal sized cable end, you don't need a right angle adapter. It just makes it easier.
I've uploaded my files to Printables.com [here]. Although I didn't need them myself I've also added a 1mm shim along with the 2mm in case anyone needs intermediate vertical adjustment.
Whilst I'm here, my previous plan was to make the monitor>cab mount in [this post] to get my cabs up and running and then pickup work on the universal mount later in the year. Rather than do the job twice I've decided to do it properly once. I've stopped working on that design and i've instead been focusing on an all metal mount and I'm just going through the design with my fabrication guy.
I'm going to make two mounts for myself and couple of mates. If you are interested @Exroath or anyone else then I can look to get some additional ones made. I'll be shipping from the UK so it might only be suitable for UK/EU guys but the design should make it fairly easy to ship. I'll most likely stick up an interest check thread soon to see if anyone wants one and/or is interested in help testing/developing the first version.
Brilliant!I've spent a lot of time on this recently but I'm really happy with how things have turned out. I got a design made and the legendary Craig @ atbfab.com fabricated the parts for me. I've had a few internal revisions and two production visions but this is where I am currently:
I've used 2040 aluminum section for the cross bracing as it's really strong but light. It also gives lots of bolt/clamping opportunities on all sides/ends.
This also makes it a modular mount so it's easy to make any future adjustments with out redesigning/manufacturing the whole thing and it also means it can be compactly packed for shipping.
PEM self-clinching nuts are used throughout. No drilling required.
Fitted to my Diamond Blue frames and LG 32GN550 displays:
I've also been working with my good buddy @wonderbanana during design. I took the third kit to his and we successfully fitted it to his Vewlix F and his LG 32GN600B (with the ridiculous protruding stand mount)
I measured up for the required corner brackets whilst I was there and I'll sort him out with a set of those too.
I've got a few more things to sort out and I'll then see if anyone else could use one.
Thanks for your answer , I just replied .Thanks all!
I'll send you all a message once I've got a post up.
@Kiljon91 - brackets on their own will be no problem.