I have a Naomi 2 board that I purchased a few weeks back along with a NetDIMM board with firmware 4.02. Earlier today, it worked just fine. However, now it is doing nothing but showing a blank screen on boot. I don't even get the NAOMI 2 logo or anything. Specifically, my monitor shows a black screen for a few seconds, then turns off as if there's no input.
Any ideas as to what could be wrong or how I could troubleshoot the issue. I've tried re-seating the board on the Naomi 2, as well as re-seating the upper board of the NetDIMM with the lower one, and haven't had any luck.
Any ideas as to what could be wrong or how I could troubleshoot the issue. I've tried re-seating the board on the Naomi 2, as well as re-seating the upper board of the NetDIMM with the lower one, and haven't had any luck.